JustGoFly Order Form
We're vacationing until July 6th.
All orders placed upto July 5th will ship on the 6th.
Quick Index
|

FireFox and MS Explorer should now work - please email us if you find problems.
INFO@JustGoFly.com
| Feb 2 |
New Motor: 560TH for TRex 500 and Jets on 6S. Introductory Low Price ! |
| Feb 2 |
1S-6S Battery Charger available at a great price |
| Jan |
550TH Motor added. I run this on 4S in a Jet and have achieved 148 mph - see video. |
| Nov 22 |
Prices reduced on some motors ! |
|

Video Problems
Download the free Microsoft video player.
|
Changes have been made to this form to not use your email client. If you have had a problem with this previously - give it another try. More changes are coming.
Press REFRESH to be sure you have the latest updated web page
1) Type the number of each item you would like in the box next to the description.
2) On the bottom of this form is the final price -
3) press Submit Order on bottom of this form.
We will email you an invoice with your order.
4) Follow payment instructions on the subsequent screen.
5) "Product Info" button will launch a separate window. To get back to your order - press ALT TAB on Windows operating system.
See Menu above for information on products, and click on images |
New 550-560 Size Motors

Size comparison of 450TH, 500TH, 550TH
Click images for larger view
The long awaited 550 motors are now available. Ideal for 4S operation.
More details pending ...
We would appreciate feedback on each of these new motors !
|
560TH Motors

1650 Kv
|
560TH Tractor Motor
5mm axle
Include 4mm gold connectors, heat shrink and screws
|
This motor is amazing on 5S or 6S in a Jet. Designed for the TRex-500 and a long time in the making.
Introductory Price !
$ 59.95 each
Please see our 5mm pinions below |
Kv: 1650
3-6S LiPo
Idle Amps: (IO) 2.5
45 Amp
Weight: 149 Grams
Shaft Diameter: 5mm
|
IN STOCK |
550TH Motors
2700 Kv |
550TH Pusher Motor I
4mm axle - Gen 1
Include 3.5mm gold connectors, X Mount, heat shrink, and screws
This motor is very fast, the only difference between GEN I and II is we have improved the wire to enable it to handle higher amps. Once Gen I are gone we will not sell them again. |
Amazing on 3S 6x4 prop - 400 Watts !
4.7x4.2 on 4S - Amazing !
Very fast with high thrust.
$ 69.95 each
Generation I
Blow out SPECIAL !
$ 54.95 each (Reduced) |
76 Gram
32.6 mm diameter
Kv: 2700
IO: 2.2 amp@10v

Screws are standard 3mm .5 pitch spaced 16x19mm in X. |
IN STOCK |
550TH Pusher Motor
4mm axle - GEN 2
Include 3.5mm gold connectors, X Mount, heat shrink, and screws
Tested on Projeti on 3S 6x4 at 133 mph, see videos.
If you run 4S on 5x5 prop - you must use an aluminum mount to act as a heat sink. if you mount inside a fuselage or on wood or plastic - drop to 4.7x4.2 on 4S. 6x4 is still fine on 3S.
|
Very fast with high thrust.
Amazing on 3S 6x4 prop - 400 Watts !
5x5 on 4S - Amazing !
Generation II
$ 69.95 each
Promo SPECIAL !
$ 59.95 each (Reduced) |
IN STOCK |
550TH Tractor Motor
3.17mm axle - GEN 1
Include 3.5mm gold connectors, heat shrink, and screws
This motor is very fast, the only difference between GEN I and II is we have improved the wire to enable it to handle higher amps. Once Gen I are gone we will not sell them again.
|
Amazing on 3S 6x4 prop - 400 Watts !
4.7x4.2 on 4S - Amazing !
Very fast with high thrust.
$ 69.95 each
Blow out SPECIAL !
$ 54.95 each (Reduced) |
76 Gram
32.6 mm diameter
Kv: 2700
IO: 2.2 amp@10v
 Screws are standard 3mm .5 pitch spaced 16x19mm in X. |
IN STOCK |
550TH Tractor Motor
3.17mm axle - GEN 2
Include 3.5mm gold connectors, heat shrink, and screws
Tested on Projeti on 3S 6x4 at 133 mph, see videos.
If you run 4S on 5x5 prop - you must use an aluminum mount to act as a heat sink. if you mount inside a fuselage or on wood or plastic - drop to 4.7x4.2 on 4S. 6x4 is still fine on 3S.
|
Amazing on 3S 6x4 prop - 400 Watts !
5x5 on 4S - Amazing !
Very fast with high thrust.
$ 69.95 each
Promo SPECIAL !
$ 59.95 each (Reduced) |
IN STOCK |
550ST Motors

2250 Kv |
550ST Pusher Motor
4mm axle
Include X Motor Mount, 3.5mm gold connectors, heat shrink, and screws |
This motor is for 3S, 4S use. For 3S use you should use the 500T motor.
$ 69.95 each
Fast 100+ mph / Powerful / Efficient
See 4mm Prop Adapters below |
76 Gram
32.6 mm diameter
Kv: 2250

Screws are standard 3mm .5 pitch spaced 16x19mm in X. |
IN STOCK |
550T Motors

2000 Kv |
550T Pusher Motor
4mm axle
Include X Motor Mount, 3.5mm gold connectors, heat shrink, and screws
6x4 prop on 4S - 40 oz's of thrust at 27 amps, 92.8 mph - not full throttle. Full throttle prop cavitated, will be faster once the prop is allowed to unload in the air.
7x5 prop on 3S - 36 oz's of thrust at 27 amps.
Gas prop is stronger, but 'e' props will work. |
This motor is for 3S, 4S use. For 3S use you should use the 500T motor.
$ 69.95 each
Fast 100+ mph / Powerful / Efficient
See 4mm Prop Adapters below |
76 Gram
32.6 mm diameter
Kv: 2000
IO: 1.1 amp@10v
Screws are standard 3mm .5 pitch spaced 16x19mm in X.


|
IN STOCK |
| |
550T Tractor Motor
4mm axle
Include 3.5mm gold connectors, heat shrink, and screws |
IN STOCK |
550XT Motors

825 Kv |
550XT Pusher Motor
4mm axle
Include X Motor Mount, 3.5mm gold connectors, heat shrink, and screws |
This motor is for 3S, 4S use. For 3S use you should use the 500T motor.
$ 59.95 each
$ 49.95 each
Price Reduced - even further
See 4mm Prop Adapters below
Lots of thrust at low amps !
I like 12x4.7 prop,
11x5.5 works as well
email for thrust and amp charts |
32.6 mm diameter
Kv: 825




Screws are standard 3mm .5 pitch spaced 16x19mm in X. |
IN STOCK |
500 Size Motors
|
500TH Motors
3380 Kv


Click for larger view of photos |
500TH Tractor Motor
3.17mm axle
Includes 3.5mm gold connectors, heat shrink, and screws
Heli Flyers: Be sure to choose a 3.17mm pinion between 11T and 15T depending on your heli flying skills.
Recommended Pinion 13T for 3000+ RPM.
11 or 12T for normal flyers.
Bell has a E Clip locking the bell in place but is removeable and can be converted into a pusher or 500T for lower Kv. |
Helis: 13T, 14T Pinion - 3000+RPM
Jets: 4.7x4.2 on 3S
Clip located on axle to enable use of this motor in pusher format.
$ 59.95 each
Fast / Powerful / Efficient
Heli Flyers: Feel free to remove the C Clip - we added based on your feedback but it adds no real value. If gets caught in the bearing it can saw your axle in half. |
57 grams
32.6 mm diameter
Kv: 3380
IO: 2.4 amps @10v
RM: .0172 Ω
36 amp max
400 Watts

Screws are standard 3mm .5 pitch spaced 16x19mm in X.

Heli vid - Night Flying

|
IN STOCK |
500TH Pusher Motor
4mm axle
Includes X Motor Mount, 3.5mm gold connectors, heat shrink, and screws
Bell has a C Clip locking the bell in place but is removeable and can be converted into a tractor or 500T for lower Kv. |
Jets: 4.7x4.2 Prop 3S
$ 59.95 each
Fast 100+ mph / Powerful / Efficient
See the new 4mm Prop Adapters below |
IN STOCK |
500T Motors
1950 Kv
Click for larger view of photos |
500T Tractor Motor
Includes 3.5mm gold connectors, heat shrink, and screws
3.17mm axle |
Pylon Racer/Park Jet: 7x5e, 6x6.5e Prop
$ 59.95 each
High Thrust / 80 mph / Efficient
For those that prefer to climb into the clouds rather than blistering speed. See the new 4mm Prop Adapters below |
62 grams
32.6 mm diameter
Kv 1950
36 amp max
400 Watts

500T Videos on YouTube

TwinRexx 4S 12T Heli Video

Screws are standard 3mm .5 pitch. |
IN STOCK |
500T Pusher Motor
4mm axle
Includes X Motor Mount, 3.5mm gold connectors, heat shrink, and screws
Bell has a C Clip locking the bell in place but is removeable and can be converted into a tractor or 500T for lower Kv. |
Out of Stock

|
500SH Motors
2920 Kv

Click for larger view of photos |
500SH Tractor Motor
3.17mm axle
Includes 3.5mm gold connectors, heat shrink, and screws
Be sure to choose a 3.17mm pinion |
Helis: 14,15T Pinion 3S
11T,12T on 4S.
Jets: 5x5 Prop
Clip located on axle to enable use of this motor in pusher format.
$ 59.95 each

|
62 grams
32.6 mm diameter
Kv: 2931
IO: 1.79 amps @10v
RM: .0247 Ω
25+ amp max
300+ Watts |
IN STOCK |
500XT Motors
900 Kv
|
500XT Pusher Motor
4mm axle

Includes X Motor Mount, 3.5mm gold connectors, heat shrink, and screws
4mm Prop Adapters Available |
Direct Drive: 11x5.5 Prop
price dropped
$ 39.95 each

Add a 500 HIGH SPEED BELL to this to get 500XTF capabilities. |
500XT uses Mid Speed Prop - conversion of this to HIGH SPEED results in 500XTF.
Same bell line as 500TH, 500T, 500SH.
Swap bells between 500XT and 500TH and you get : 500XTF and 500T. |
IN STOCK |
| |
500XT Tractor Motor
3.17mm axle
Includes 3.5mm gold connectors, heat shrink, and screws
3.17mm Prop Adapters Available
|
IN STOCK |
500XTF Motors
1650 Kv
|
500XTF Pusher Motor
4mm axle

Includes X Motor Mount, 3.5mm gold connectors, heat shrink, and screws
4mmProp Adapters Available
Add a 500 MID SPEED Bell to this to get 500XT capabilities |
Direct Drive: 8x4 Prop
price dropped
$ 39.95 each


|
Higher Speed version of the 500XT - enables higher speed on a smaller prop. Ideal for Hydroplanes or fast parkflyers that have limited prop size. Convert between 500XT and 500DXTF with a bell change. |
IN STOCK |
New 450 Size Motors
|
450T2 Motors
1450 Kv
Q: Why is this name T2 ?
A: It should be 450T - since it replaces the 400T 1300 Kv motor. But we used 450T for the higher speed 450TH mod, which results in our 450T 1700 Kv motor. Sorry for the confusion. This motor uses a MID Speed bell - we have not tested a high speed bell on it - but we suspect a 2400-2500 Kv will result. |
450T2 Pusher Motor
3mm axle
A PERFECT more powerful replacement for a 400T !
Include X Motor Mount, 3.5mm gold connectors, heat shrink, and screws
 |
This motor is for 2S, 3S use.
$ 39.95 each
About 60mph on under 20 amps - 3S.
3S - 8x5, 8x6 prop - Sport Flying - FAST
2S - 9x5
Screws are standard 3mm .5 pitch spaced 16x19mm in X.


|
45 Grams
25.6mm diameter
Kv 1450
IO: 1.1 amps @10v 24 amp max - 3S
250 Watts
3 mm axle
I love this motor. 8x6 Prop is crazy fast with great thrust, 8x5 is also excellent on his motor in a sub 2 lb sport plane. |
Pusher
IN STOCK |
450T2 Tractor Motor
3mm axle
Include 3.5mm gold connectors, heat shrink, and screws |
Tractor
IN STOCK |
450 Size Motors
All of the 450 size motors have two different screw sizes that hold the motor to the mount.
3mm .5 pitch and 2.5mm .45 pitch - standard screws and supplied with the motors.
These are standard screws. 5 to 6mm length is sufficient to mount the motor in most cases.
The X spacing of the screws is 16mm x 19mm - standard. |
450TH Motors
3000 Kv
Heli, Jet, Wing and large plane motor
Most asked Question:
Q: What is the most versatile motor ?
A: The 450TH can be run in a helicopter, gearbox for gas conversions or lots of thrust and speed, direct drive in Jets and wings and with the swapping of bells for the MID SPEED bell can run larger props. Larger props are ideal to slow the plane/Jet down, tweak everything in with higher thrust and then switch to the speed demon TH High Speed bell with a small prop for high speed. The same can be done on the 450F to convert to 450FT, but the 450F can not run a prop directly bigger than 4 inch's.
Q: What is advantage / disadvantage of 3.17mm over 2.3mm
A: 450TH 3.17mm bell is locked on and can not be removed. 2.3 and 3mm can be removed and replaced with pusher bell or MID KV bell to convert motor to a lower KV.
Q: Why is 3.17mm more popular than 2.3mm
A: Align makes 13T 3.17mm pinions but 2.3 is more popular with 4S flyers on 450TH or 450F motors.
Q: What pinion do I need for T-Rex
A: 13T module 0.5 3.17 or 3.2 mm for 2600 RPM
Q: How do I get best of both worlds
A: Buy the 2.3mm 450TH and purchase or as us for a 2.3 to 3.17mm (1/8) conversion tube at Tower Hobbies I have some brass and aluminum. Drop me a note and I'll include one with your order. Then you can remove the bell and replace with MID SPEED Pusher for a Wing or put this motor in a gearbox for 3D on a 3 pound plane.
Q: Compared this to another motor ?
A: Mega 16/15/3 - ours is lighter and most say more powerful, change the bell and you get a 16/15/5 comparable motor.
|
450TH Tractor
Includes 2.4mm gold connectors, heat shrink, and screws
IDEAL for T-REX
3.17 mm axle
T-Rex flyers love this motor on 13T pinions.
Helis, and geared large plane motor
4S Setup Video
Kyle Rocks! 13T, CF Blades, 3S
Pierre - 14T, 315mm Woodies, 3S
Click here to jump to pinions |

450TH
Heli, Jet, Gas Conversion Motor
$ 55.95 each

Q: Who likes this motor ?
A: T-Rex guys are going nuts on this motor. Jet guys love it for high speed. Wing guys who love adrenaline. Large planes geared for over 3 lbs of thrust, sport flyers who want to kick but with speed and thrust geared. Change to a MID SPEED bell and reduce KV to 1700 for pylon racers, and 7 or 8 inch props direct drive. 450TH on it's native High Speed bell is ideal on a 5 inch prop. Swap the bell for Mid Speed, which I call the 450T motor and run a 7-8 inch bell.
Prop Recommendation:
4.7x4.2 Prop
4.75x4.75 Prop
|
55 grams
27.7mm diameter
Kv: 3000
IO: 1.4 @ 10 volts
RM: 23 mΩ (.023Ω)
25 amp max
275 Watts
Un-believable motor
Prop tests are now posted
See links on 450TH page to T-Rex discussions by pressing Product Info.

Change Bell of 2.3 or 3mm to TORQUE Bell for 1700 KV and direct drive use or large blades.
|
IN STOCK
|
450TH Tractor
Includes 2.4mm gold connectors, heat shrink, and screws
IDEAL in gearbox or Heli !
2.3 mm axle
Helis on 11T to go milder on batteries, 13T recommended on >315 blades, 14T can be used on shorter blades.
Can be geared in large plane motor with our blue aluminum gearbox. Ideal for T-Rex, Gas Conversion Planes.
Geared PT-17
Power - oh yeah |
IN STOCK
|
450TH Pusher
Includes X Mount, 2.4mm gold connectors, heat shrink, and screws
IDEAL for Jets!
3 mm axle
Fast Jet direct drive or large Wing
Wing Video
RiteWing TL - 450TH - Prop 5.7x3
MicroJet CRASH
|
IN STOCK |
450T Motors
1700 Kv
High thrust - direct drive
Take a 450TH - Change to MID SPEED Bell - you get a 450T. |
450T Pusher
3 mm axle
Includes X Mount, 2.4mm gold connectors, heat shrink, and screws
|
450T
Wing Motor
$ 55.95 each

Prop Recommendation:
7x5, 7x6 prop, 6.5x6, 6.5x5.5, 6x5.5
TwinJet Video Part 1

Blue Core Stryker Wing

Wing

and another easy flying video on the TL Wing by Craig Thompson
"Splat" Bluecore Wing

If you want higher thrust and lower speed - this is the motor for you ! When your ready for higher speed swap to a high speed bell to convert this to a 450TH Motor. Swap in a tractor bell for running in a gearbox with a high speed bell. |
64 grams
27.7mm diameter
Kv 1700
25 amp max - 3S
275 Watts
3 mm Pusher axle
Great on 7x5 prop. Other 7 inch props with higher pitch will be available shortly. |
IN STOCK |
450T Tractor (new)
3 mm axle
Includes 2.4mm gold connectors, heat shrink, and screws |
Out of Stock

|
450F Motors
3450 Kv

Heli, Jet, Wing and large plane motor |
450F Tractor
2.3mm axle
Includes 2.4mm gold connectors, heat shrink, and screws
450F is ideal in T-Rex Helicopters with 10T pinion and in a gearbox for Larger planes or larger performance on smaller planes. 6.33 'I' geared with 13x8 prop and over 3 lbs of thrust at 260 Watts. 3.9, 4.5 also work very well on smaller props with huge performance.
Helicopter Video
|

450F
Heli Motor
$ 55.95 each
Pinion Recommendation:
10T on 3S
Airplanes - Gearbox recommended - thrust is spectacular in our Blue Gearbox with this motor.
|
55 grams
27.7mm diameter
Kv: 3450
IO: 1.8 @10v
RM: 40.5 Ω
25 amp max
250 Watts
|
IN STOCK
Check out our new pinions for T-Rex below |
450F Tractor 3mm axle
Includes 2.4mm gold connectors, heat shrink, and screws
check out the 3mm pinions
|
IN STOCK
|
450XT Motors
950 Kv
Ultimate 3D Motor |
450XT Pusher
3 mm axle
Includes X Mount, 2.4mm gold connectors, heat shrink, and screws
- 3D for large 3D planes
3mm pusher can be mounted as tractor on front of a fuselage. C Clip holds on the Bell.
Pusher Configurations in tractor format |
450XT
3D and Warbird Motor
$ 50.95 each
$ 41.95 each

Prop Recommendation:
10x4.75 Prop
10x6 Prop
|
63 grams
27.7mm diameter
Kv 950
15 amp max - 3S
180 Watts
3 mm Pusher shaft
3D without breaking a sweat
|
IN STOCK
|
450XT Tractor
3 mm axle
Includes 2.4mm gold connectors, heat shrink, and screws
Tractor has the axle coming through the Yellow side of the motor and is intended to be mounted behind a firewall or mount |
IN STOCK |
Helicopter Pinions
see above for .6 steel pinions
|
3.17mm Pinions
0.5 modulus
Q: My heli needs 3.2mm
A: The 3.17mm is the same as the 3.2 - some just round the number up. The 3.17 is actually 1/8 which is really 3.175mm. 1/8 * 25.4 = 3.175 but reduced a bit to make a snug fit on the 1/8th" axle.

|
10T Pinion - 3.17mm
11T Pinion - 3.17mm
12T Pinion - 3.17mm
13T Pinion - 3.17mm
14T Pinion - 3.17mm
15T Pinion - 3.17mm
|
Helicopter 3.17mmPinions
Match the pinion to the axle 3.17mm to 3.17mm
Locking Set Screw
3mm ID
$3.95 each
|
Excellent in T-Rex and many other helicopters that work best on 0.5 modulus pinions. |
IN STOCK |
3mm Pinions
0.5 modulus
Q: Why 3mm vs 3.17mm ?
A: Ahhh - I thought you'd never ask. The 450TH 3.17mm motor is very popular for heli's. But the 3.17mm 450TH bell is locked since it has a 3mm axle into the bearing. If you intend to ever fix or change the bell on your 3.17mm heli motor - the 3mm version with a 3mm pinion will offer you more options. Run it in a heli - change the bell and run it in a gearbox, direct drive on a jet or pusher on a jet.
Also
These will fit 400DF - 15T on small heli's.
|
10T Pinion - 3mm new
11T Pinion - 3mm
12T Pinion - 3mm
13T Pinion - 3mm
14T Pinion - 3mm
15T Pinion - 3mm |
Helicopter 3mm Pinions
Match the pinion to the axle 3mm to 3mm
Locking Set Screw
3mm ID
$3.95 each
|
Excellent in T-Rex and many other helicopters that work best on 0.5 modulus pinions. |
IN STOCK |
2.3mm I.D.
Short Pinion
0.5 modulus
|
8T Pinion .5 mod
9T Pinion .5 mod
10T Pinion .5 mod |
$2.95 each
|
Pinions - 5mm tall
Friction held - loctite is recommended.
400DH 3S,
450TH, 450F 4S
|
IN STOCK |
2.3mm I.D.
Long Pinion
48 pitch
Q: 48 pitch vs .5 modulus ?
A: .5 modulus is 50.8 pitch and is not an exact fit for our 48 pitch pinions. Many have used out 48 pitch pinions in their .5 modulus helicopters and they work well. If you need 8T, 9T, 110T you need to use the 48 pitch - as far as I can find there are no 8T, 9T pinions at 0.5 modulus. These work well on 0.5 modulus helicopters and are used by many on high speed motors in helis. |
8T Long Pinion
Recommended for ShoGun Heli |
Long 8 tooth pinion
48 Pitch
friction Hold
for 400DH
2.3mm ID
See note on left
$ 3.95 each |
Excellent in Shogun and Hornet.
T-Rex requires .5 modulus pinion - these are not an exact fit but will work and used by many on the T-Rex without complaint.
|
IN STOCK |
9T Long Pinion
for 400DH 3S or 450TH 4S, 450F 4S |
Long 9 tooth pinion
48 Pitch
friction hold
for 400DH
2.3mm ID
$ 3.95 each
|
T-Rex 400DH,
overkill for Shogun - use 8T in shogun.
T-Rex requires .5 modulus pinion - these are not an exact fit but will work and used by many on the T-Rex without complaint. |
IN STOCK |
10T Long Pinion
450TH 4S, 450F 3S |
Long 10 tooth pinion
48 Pitch
for 450F
2.3mm ID
$ 3.95 each
|
T-Rex/Shogun Heli 450F.
|
IN STOCK |
400 Size Motors
|
400DH Motors
4000 Kv
Zoom Shogun,
T-Rex,
Hornet Heli motors
3D capable
Mar 2007 FlyRC Magazine - Ideal for HobbyKing Heli
Most asked Question:
Q: This motor or the 450TH for T-Rex, shogun, Hornet or any 500 gram or lighter heli.
A: If you are not into insane 3D - then 400DH on a 9T pinion will get you longer flight times and very good performance. |
400DH - Heli Motor
Gen II

Don't forget an 8T 48 pitch pinion for Shogun and gold connectors for Motor to ESC. |
400DH Gen II
Higher temp wire and stronger axle
Heli Motor
$ 49.95 each

|
<43 grams
25.4mm diameter
Kv 4000
25 amp max
270 Watts
2.3 mm axle
|
IN STOCK |
| 300DF Motors
2250 Kv
1 Lb or lighter Wings, Light Racers - direct drive,
Geared for 3D planes,
24 oz or lighter planes |
300DF Tractor Motor
2.3mm prop shaft for gearbox mount
3mm prop shaft for direct drive
Click image for larger view |
300DF
Gearbox for large props, or 5 inch prop for direct drive applications
$ 39.95 each
$ 31.95 each


|
<30 grams
Kv 2250
10 amp max
Small - deceivingly powerful, fast - not a 3D Motor. More for 60-70 mph sub 16 oz airplanes direct drive or geared upto 24 oz's.
|
|
|
IN STOCK
|
400F Motors
2250 Kv
Very fast racers, geared for many size planes.
This is my favorite Formosa Motor ! |
400F Motor
Includes 2.4mm gold connectors, heat shrink, and screws
Click image for larger view
400F Motor is BLUE
|
400F
$ 39.95 each

EasyStar Video

|
46 grams
Kv 2250
15 amp max
Great pylon racer motor, Formosa 60-70 mph setup |
Out of Stock

|
|
400F 3mm Pusher |
Out of Stock

|
400DF Motors
3000 Kv
Helis,
Very Fast Wings, Racers,
Hot Liners,
Slope Soarers,
geared for heavy planes 41+ oz of thrust at 15 amps 11.1v
EZone Review
also
In April FlyRC Magazine as extreme motor for AeroCat |
400DF Puller Motor (Tractor)
Includes 2.4mm gold connectors, heat shrink, and screws
2.3mm Tractor
Click image for larger image |
|

Click image for larger image
400DF
New Permanent low price!
$ 39.95 each

EZone Review
FlyFast!
|
46 grams
Kv 3000
25 amp max
Has clip to enable it to be mounted as a tractor on front of a firewall, or mounted in rear as a pusher.
Reverse any two wires to reverse the motor.
This motor is ideal for Jets, small helicopters and can easily be converted into a 400DH with replacement of the bell with a 400DH bell. VERY VERSATILE MOTOR.
|
IN STOCK |
3mm Tractor
15T pinion for 3D Pro Heli is above
Click here to jump to pinions |
IN STOCK |
400DF Pusher Motor
Includes 2.4mm gold connectors, heat shrink, and screws
|
3mm axle for direct drive, Jets and very fast wings |
|
IN STOCK |
400ST Motors
1100 KV

|
400ST Brushless Motor
3D Motor !
7x6 to 10x4.7 Props Direct Drive at 11.1 volts.
|
400ST
$ 39.95 each
Price Reduced !

|
38 grams
Kv 1100
10 amp max
3mm Shaft
Free Motor Mount |
IN STOCK |
Inifinity Motor

Click image for larger image
Outstanding motor with 5.28 Gearing on a GWS WarBird and 11x7 prop or 10x10 APC prop for speed.
Appropriate for many other planes and heli's
.
|
Infinity Brushless motor and Heat Sink
Click images for larger image
Axle size: 2.3mm wide, 10mm long
Motor size: 20mm wide, 40mm long,
Collar on each end of motor : 10mm wide, 2.5mm long
Heat Sink size:
OD - 27mm, ID 20mm , length 30mm
Heat Sink Opening: 11mm opening, 16mm screw holes
|
$15 Heat Sink Included,
3.5mm gold connectors included
Fits 400 size gearbox with heat sink installed
$39.95 each
Price Reduced !

Connectors soldered as shown, plus 3 gold connectors for ESC, and heat sink included.
Motor fits 400 Gearbox with heatsink perfectly.
|
64 grams
Kv 3700
15 amp max
2.3mm shaft

Click for Size information
|
IN STOCK
SALE
|
Large Heli and fast gas conversion Motors
Size comparison of 50,30,20 and 450TH

Click images for larger view
Voltage Range intended for 4S..12S
Excellent in Heli's and large fast airplanes
We would appreciate feedback on each of these new motors ! |

| Motor |
A mm |
B mm |
C mm |
D mm |
E mm |
F mm |
G mm |
H mm |
| 50 |
5 |
22 |
61 |
49 |
30 |
25 |
M3 |
M3 |
| 30 |
5 |
23 |
59 |
43 |
30 |
25 |
M3 |
M3 |
| 20 |
5 |
25 |
50 |
43 |
30 |
25 |
M3 |
M3 |
|
50 Motor
780 Kv |
50 Size Motor
5mm axle
Max Current: 60 Amps
Diameter :48.8mm
Length :60mm
Shaft Diameter: 5mm
Poles: 8
KV: 780
Weight: 350g
Input power: 3-12S LiPo |
Logo 10 or Swift Heli on 8S LiPo or 10S A123-M1 pack.
$ 113.95 each
$ 99.95 each
Lower Price
Includes 4mm Gold Connectors
|
Kv: 780
RM: 20 mΩ
IO: 1.7 amp@10v
Helis: 600-620 blades
TRex 600, Raptor 620SE, Logo 14,
MA Razor (10S)

Flys the HELL out of a big airplane too.
|
IN STOCK |
30 Motor
1360 Kv |
30 Size Motor
5mm axle
Max Current: 58 Amps
Diameter :42.7mm
Length :60mm
Shaft Diameter: 5mm
KV: 1360
Weight: 275g
Input power: 3-10S LiPo |
TRex 600 Heli Motor
$ 89.95 each
Lower Price
Includes 4mm Gold Connectors |
Kv: 1360
IO: 1.2 amp@10v
Helis: 500-580 blades
Swift, Logo10, Hurricane 550
Airplane: EDF or Jet |
IN STOCK |
20 Motor
1700 Kv |
20 Size Motor
5mm axle
Max Current: 45 Amps
Diameter :42.7mm
Length :50mm
Shaft Diameter: 5mm
Poles: 8
KV: 1700
Weight: 210g
Input power: 3-8S LiPo |
TRex 600 Heli Motor
$ 84.95 each
$ 79.95 each
Lower Price
Includes 4mm Gold Connectors |
Kv: 1700
RM: 16 mΩ
IO: 2.7amp@10v
Helis: 400-470 blades
Logo10, QJ-8, ECO-8,TRex 500, Swift, Lepton
Airplane: EDF or Jet |
IN STOCK |
Steel Pinions
.6 Module
5mm Pinion
for above motors
|
12T
13T
14T
15T
16T |
Helicopter 5mm
0.6 Module Pinions
$ 3.95 each(Reduced)
Match the pinion to the 5mm axles
with Locking Set Screw
|
These pinions fit 5mm shafts |
IN STOCK |
|
Suppo Motors
We've decided to pad our offering with a variety of another companies motors to offer you a wider range of choices and to fill in some gaps of sizes that we have not previously offered. I hope you enjoy these low cost motors.
Excluded from free U.S. shipping deal
Gold connectors not included with any of the Suppo motors |
|
U5345-7 Motor
X Mount and prop adapter included
|
For your BIG planes:
Upto 20 lb Airplanes
$ 119.95 each
Recommended Direct Drive Prop:
10S LiPo: 21 x 13
100 Amp ESC recommended
|
Kv: 200
Rm: 44 mΩ
Io: 1.2a at 10v
60 Amp Continuous
90 Amp max
3000 Watts Max
Weight 726 Grams
Size: 63x76
8mm reversible axle
4-12 S LiPos |
IN STOCK
New |
4130
For you Big Planes
|
U4130-6 Motor
X Mount and prop adapter included
 |
For your BIG planes:
Upto 13 lb Airplanes
$ 61.95 each
Recommended Prop No Gear Box:
5S LiPo: 18 x 8
6S LiPo: 16 x 10
7S LiPo: 14 x 10
16 Cell NiMh: 18 x 10
20 Cell NiMh: 16 x 10
24 Cell NiMh: 14 x 8 |
Kv: 530
50 Amp Continuous
70 Amp max
1500 Watts Max
6mm reversible axle
Poles: 14
No Load Current 2.4 amps at 10 volts
4-7 S LiPos |
IN STOCK
New |
.40 - .60
Gas Conversion
|
U4120-6 Motor
6mm axle
X Mount and prop adapter included
50 mm diameter
45mm base to end of bell
5mm long ring on axle below base |
8-10 Lb Airplane weight
6S Max voltage
1100 watts
Recommended Prop No Gear Box:
4S 16x8 Prop 45 amps
5S 12x8 Prop
6S 12x6 Prop
Axle can be swapped from Pusher to Tractor.
$ 53.95 each |
Kv: 620
60 amp max
Rm: 0.033
io: 2.6A
Poles: 14
1100 Watts
Weight: 309 grams
9.9 Oz's
6mm axle reversible |
IN STOCK
New |
U4120-7 Motor
6mm axle
X Mount and prop adapter included
50 mm diameter
45mm base to end of bell
5mm long ring on axle below base
|
8-10 Lb Airplane weight
6S Max Voltage
4S 13x11, 14x9, 15x7 Prop
5S 12x8 13x6.5 Prop
Axle can be swapped from Pusher to Tractor.
$ 53.95 each |
Kv: 530
40 amp continuous 55 amp max
Rm: 0.041
io: 2.0A
Poles: 14
1100 Watts
Weight: 309 grams
9.9 Oz's
6mm axle reversible |
IN STOCK
New |
| Propeller: |
Volts (V): |
Amps (A): |
Thrust (g/oz): |
Power (W): |
| APC 12 x 6 E |
18.9 V |
31.5 A |
2.38 kg / 85.1 oz |
595 W |
| APC 13 x 10 E |
14.9 V |
39.4 A |
1.75 kg / 62.4 oz |
587 W |
|
BIG
.30 Gas Conversion
High Speed
3520 Motor
Photo shows motor in Pusher Configuration. Can be converted with no additional purchase to tractor mode.
Click for larger view of photos |
U3520-6 Motor
5mm axle
X Mount and prop adapter included
Photo shows motor in Pusher Configuration
 |
3-6 Lb Airplane weight
6S Max Voltage
750 Watts Max
6S 8x6 Prop - 31 Amps
5S 9x7 Prop
4S 12x6 Prop
Ring located on axle to enable use of this motor in pusher format.
Axle can be swapped from Pusher to Tractor.
$ 39.95 each |
Kv: 840
40 amp max
750 Watts
Weight: 210 grams
7.4 Oz's
5mm axle reversible
40 mm diameter
43mm base to end of bell
5mm long ring on axle below base
Axle 22mm long x5mm |
Out of Stock

|
| Propeller: |
Volts (V): |
Amps (A): |
Thrust (oz): |
Power (W): |
RPM: |
| APC 12 x 6 E |
11.33 V |
24.66 A |
42.5 oz |
274 W |
6965 |
| APC 12 x 8E |
11.35 V |
27.5 A |
43.3 oz |
306 W |
6763 |
| APC 12 x 8 E |
13.51 V |
39.8 A |
61.2 oz |
530 W |
8191 |
| APC 12 x 6 E |
13.56 V |
36.1 A |
65.1 oz |
483 W |
8438 |
| APC 11 x 7 E |
18.05 V (A123) |
47.52 A |
74.1 oz |
837 W |
10125 |
|
3-6 lb airplane or hotliner
|
U2826-4 Motor
X Mount and prop adapter included
|
$ 36.95 each
I run this on 5S, 9x9 prop in a Sonic Quickie 500 - great power. I did a 7S burn out test on the quickie with 8x8, amazing speed - but high amps rerquired large LiPos.
Props:
3S - 14x7
4S - 13x8
5S - 12x6, 11x8, 9x9 |
Kv: 1000
40 Amp Continuous
50 Amp max
740 Watts Max
5mm reversible axle
Weight: 175g/6.25 oz
io: 1.5am
rm:59
mΩ
Size: 35 x 54 mm
Poles: 14
2.9 amp no load @ 10 volts
28mΩ resistance
3-5 S LiPos
Our 70 amp ESC is ideal |
IN STOCK |
1-2 lb airplane, not a speed demon, 3D or Parkflyer
1000 Kv
Photo: 2212 and 2814 |
U2814-8 Motor
X Mount and 4mm prop adapter included
|
$ 29.95 each
I've put this motor through some serious burn out tests and it surprised me on every test. I think you will love this motor for your Slow Stick, or any 1-2 lb 3D airplane.
|
Kv: 1100
25 Amp Continuous
35 Amp max
380 Watts Max
4mm reversible axle
Weight: 102 Grams
3.6 oz's
IO: 1.8a
Rm: 72
mΩ
No Load Current 1.8 amps at 10 volts
Resistance: .072 ohms
3-4 S LiPos
Our 40 amp ESC is ideal
Prop - 10x4.7, 11x5 on 3S
Model Weight:
1000 - 1700 g / 35 - 60 oz |
IN STOCK |
Small
3D or Parkflyer
2212-15 Motors
930 Kv
If you enjoy ParkFlying at a low cost - this is your motor. It is efficient and a major power boost over brush motors. |
U2212-15 Motor
3.17 mm Hardened axle
X Mount and prop adapter included
9x7.5 - 9.8 amps at 10.9 volts, 46mph, 17oz's thrust
10x5e - 8.7 amps at 10.9 volts, 32mph, 22oz's thrust
11x5.5e-10.3 amps at 10.9 volts,32mph, 25oz's thrust |
This motor is ideal for parkflyers or 3D flyers who want a very efficient setup. Or intial tests were on large props and we loved it but the axle bent due to prop strikes on the ground. We modified the axle to harden it and strengthened the bell. This enables it to handle the abuse a 3D or parkflyer can inflict.
$ 29.95 each
$ 16.95 each
|
Kv: 930
12 Amp Max - 3S
140 Watts
3.17mm reversible axle
Rm: 39
mΩ
10x3.8 Slow Fly prop pulls 10 amps full throttle. |
IN STOCK
New |
Amazing small motor
8 oz 3D or Parkflyer
2204-14 Motors
1400 Kv

|
2204-14 Motor
Prop Saver and built in X Mount.
We recommend direct soldering to ESC to save weight.
8x4 GWS- 5.4 amps at 6.4 volts, 28mph, 10oz's thrust
8x4 GWS- 9.7 amps at 11.1 volts, 38mph, 18.5oz's thrust
GWS Slow Fly props fit better than HD props, but you can make the GWS HD prop fit well. Drill prop hubs with 7/32 drill bit for perfectly flat fit on prop save.
Cut silicon tube for bands to hold on props. |
$ 14.95 each

Absolutely kicks butt on a 3D Foamy. Quiet and deceivingly powerful for it's size. I ran it for a year on 8x4 3S, but it more than enough for indoor foamies on 8x4 2S. |
Kv: 1400
Weight: 19 Grams
14 pole
12 Amp 60 secs
2S - 3S Voltage
85 Watts
Rm: 0.550
IO: 0.3 Amps
Dimensions: 28mm x 11.5mm
Shaft: 3mm with prop saver
Propellors:
9x4 on 2S - most like 8x4
8x4 HD on 3S |
IN STOCK
New |
|
10 Amp ESC Gen II
Ideal for 2204-14 motor |
$ 14.95 each |
ESC - 10 Amp
1 amp BEC
Ideal for 2204 motor
Full range throttle |
IN STOCK
New |
Brushless Speed Controllers and BEC's |
Battery Eliminator Circuit
|
BEC - 5 Amp switching regulator
BEC Wiring Link |
$15.00 each |
Input voltage: 5.5-30 volts (8S Max)
Output: 5volt 5 amp Weight: 18 Grams |
IN STOCK |
Brushless
Speed
Control
Use:
12+ Amp ESC for 300's and 400ST,
22+ Amp ESC for 400's and 450XT, Infinity
32+ amp ESC's for all other 450's and 500's.
Most asked Question:
Q: Will Motor Max motors work in Helicopters ?
A: Yes - but you can not shut off the Low Voltage Cut off. So if you run your batteries to the end the motor will run between mid and high RPM when LVC hits. I use motor max ESC's in all my heli's but set a timer on my transmitter to tell me when to land.
Q: Would you use this on other genres.
A:Absolutely - great ESC with no complaints, Jets, Wings, Planes ...
|
Dynam ESC Programming Card |
$10.00 each
Simply setup your Dynam ESC |
 |
IN STOCK |
18 amp ESC

|
$17.95 each |
For when you need more than a 10 amp, but less than 25
18 Amps for 60 seconds
1 Amp BEC built in to drive servos
Brake - programmable
Low voltage auto detect
auto shut down when signal lost
LiPo or NiMh batteries |
IN STOCK |
Suppo 40 Amp ESC
Programmable: LiPo/NiMh/Brake Auto Low battery Slow down at 3.0V/cell Lipo. NiMh when selected will cut off at 60% of starting voltage. Both cut offs can be disabled.
|
Works great on 450T, 450T2, 500T, 500TH, 450XT, 500XT!
Not recommended for 400DF, 450TH
$ 30.00 each
|
For Brushless motors
BEC: 3A
Constant current 40A Max
60A <10s
Li-Poly 2-3 cells; Ni-MH 4-10 cells Auto Detect
Break On/Off
Weight: 39 grams - 1 oz
Size: 45x24x9 \ |
IN STOCK
|
Suppo 50 Amp ESC w/ 3 Amp BEC
|
$ 35.95 each |
Fixed timing - good for 2S-3S Fixed timing for motors under 2300 Kv.
The BEC is 5 volt, 3 amp.
Add external UBEC for higher than 3S.
|
IN STOCK |
Suppo 50 Amp ESC OPTO

|
$ 35.95 each
- This motor is ideal for: multi-motor setup,
- any motor that requires HIGH Timing,
- if you want more reprogrammability
- external UBEC required
|
Programmable:
2S - 7S, Auto support
4 levels of brake
soft/hard cutoff
rotation change in ESC
Timing: 1,7,15, 30º
PWM: 8 or 16KHz
|
IN STOCK |
60 Amp ESC w/ 5 amp Switching UBEC installed 4-7S
No need to solder an external switching UBEC - this is already installed on ESC.
|
$49.95 each
You will need to add Gold Connectors and LiPo connector.
|
Very low resistance:
.0014 ohms
- Battery Setting:
NiMh or LiPo
- Throttle Range: Soft, Hard, Auto, 1.1 - 1.8
- Brake Setting 4 options: No, Soft, Med, Hard
- Direction: clockwise or reverse.
- Cutoff Type: Soft and Hard Cutoff
- Timing Mode Setting:
1º /7º /15º/30º
- PWM Setting: 8K/16
|
IN STOCK |
70 Amp ESC w/ 5 amp Switching UBEC installed 4-7S
No need to solder an external switching UBEC - this is already installed on ESC. |
$55.95 each
I love this ESC for high voltage setups. I prefer the best connection of direct solder of ESC to Motor. If you need to change the motor direction, do it through programming of the ESC. |
Very low resistance:
.0017 ohms
- Battery Setting:
NiMh or LiPo
- Throttle Range: Soft, Hard, Auto, 1.1 - 1.8
- Brake Setting 4 options: No, Soft, Med, Hard
- Direction: clockwise or reverse.
- Cutoff Type: Soft and Hard Cutoff
- Timing Mode Setting:
1º /7º /15º/30º
- PWM Setting: 8K/16 |
IN STOCK |
MDrive 60 Amp ESC
 
|
$59.95 each (Reduced)

|
Includes the ESC Link Cable and Software.
Excellent for bench testing - RPM, Volts and controlled tests as well as normal use in your plane or heli. |
IN STOCK |
Motor Max Motors Brushless Speed Controller
Motor Max 22 ESC
Click image for larger image |
25 amp (60 seconds) 22 amp continuous
$32.95 each (Reduced) |
Ideal for 400DH, 400F, 400DF, 450XT
20 Grams
Plug and Play
LiPo Battery only !
Use U-BEC for anything over 3S or for 5 servos. |
Out of Stock

|
Accessories |
| Digital Volt Meter |
Digital Volt Meter
My most used tool ! I keep one in my pocket and another next to my charging station. |

Volt Meter Manual 
$9.95 each (Reduced) |
Has four prongs - stick into 2S, 3S, 4S, 5S ... LiPo with standard taps connector and it will in a series of three blinks display the individual cell voltage. Quickly determine if you are our of balance. One above 3S - just move it down the line to access more cells. |
IN STOCK |
Radio Neck Strap
with text

|
Black Radio Neck Strap w/ JustGoFly.com in yellow on the strap
I use this strap on my radio and love it. I can quickly unsnap the radio and work on the plane. Put on once and leave on.
|
$ 7.45 each  |
Comfortable, Adjustable, Easily unsnap radio when working on model. No more hitting throttle while working on plane with radio dangling. |
Out of Stock

|
Servos
|
Servo's 9 Grams
now with 25cm leads - longer than normal !
I've tested many servos and these are the only ones I'll use from now on. They have plenty of torque and I have yet to break a gearset.
Features :
Coreless Motor
All Nylon Gear
Connector Wire Length 9.8" long |
Lower price
$ 8 each
|
Specification :
Weight : 9 g
Size : 22 x 11.5 x 27 mm
Operating Speed (4.8V no load): 0.12sec/60 degrees
Stall Torque (4.8V): 17.5oz/in (1.2 kg/cm)
Temperature Range : -30 to +60 Degree C
Dead Band Width: 7usec
Operating Voltage:3.0-7.2 Volts |
IN STOCK
|
Servo's 5 Grams
now with 25cm leads - Longer than normal !
These are ideal for 3D foamies.
Also check out the 2204 motor for indoor foamies.
Features :
Coreless Motor
All Nylon Gear
Connector Wire Length 9.8" long |
Lower price
$ 8 each
|
Specification :
Weight : 5 g
Size : 20.9 X 11.4 X 22 mm
Operating Speed (4.8V no load): 0.10sec/60 degrees
Stall Torque (4.8V): 10.2oz/in (0.7 kg/cm)
Temperature Range : -30 to +60 Degree C
Dead Band Width: 7usec
Operating Voltage:4.0-7.0 Volts |
IN STOCK
|
Gearbox
3.89:1 ratio
BLUE
Q: Why this Gearbox ?
A: We fly - We sell what I love. This gearbox is useful for : 1) Firewall mount,
2) Stick Mount
3) Direct drive motor mount
Our intitial version of this mount had a thin motor mount and bent on a crash. This version has a thicker wall that is much stronger. The Spur gear is stronger with deeper teeth for longer life Use a little loctite on the pinion and add more thrust to your high speed motors. All 300, 400 and 450 size motors fit this gearbox - BUT the 500's do not.
|
 |
Assembled view with firewall mount attached. |
|
Fits 10x10mm stick or add additional part for mount infront of firewall or on round 7mm rod.
Has 4mm axle and same dimensions as GWS Gearbox. |
 |
Whole assembly weighs 26 grams.
Pinion fits 2.3mm axles. |
Click images for larger view
Blue 300/400/450 Size Gearbox Kit
|
BLUE
$ 15.00 Set
Updated Design
Click for larger view of images
Fits our 450,400, 300 size 2.3mm motors perfectly as well as any 28mm wide inrunner. If you have a 3mm motor you can purchase a 2.3mm bell to convert for use in a gearbox.
A gearbox provides slower speed and much higher thrust on a larger propellor. |
26 Gram light weight, strong, anodized aluminum gearbox.
Perfect for 300DF, 400F and 400DF motors
Suitable for:
400DF 11x7.
450TH 12x8,
450F 11x7
or change gear ratio with any GWS pinion and spur and run many other options.
GWS Spur gears fit this perfectly for a change to
3:1, 11x7 GWS HD Prop and 400F Motor.
3.4:1 11x7 450TH
4.5:1 13x8 450F
and many more options - check the charts |
IN STOCK
Now with 50% thicker motor mount plate. Less chance of bending - suitable for direct drive as well as geared. |
|
Spur and Axle for Blue Gearbox
|
$ 4.00 Set
This is an additional axle and spur gear for the above blue gearbox |
Spare parts for after a crash. |
Out of Stock |
White Spur and Pinion
for Blue Gearbox 3.89 gearing |
$
3.00
each set
New Lower Price |
Set of White Spur and Pinion |
Out of Stock |
Solder techniques:
2.4mm Connector -
Same technique as 3.5 below except feed the wire half into the 2.4mm connector and hold the solder tip on the end of the connector and the wire. Feed in the solder so it flows into the hole and on the wire. Push the wire into the hole. Hold the wire a couple inches up the wire with your hands. In about 10 seconds at a solder setting of 500-600 you should feel the heat driving up the wire. Grab a wooden stick and hold the wire and connector together and remove the solder tip. Count to 10 and add heat shrink.
3.5mm Connector -
Hold the tip of the solder in the small hole on the side of the connector. Feed in a little solder. If you feed too much don't worry there will be air in the hole. Push the wire into the solder and hold the wire a couple inches up the wire with your hands. In about 10 seconds at a solder setting of 500-600 you should feel the heat driving up the wire. Grab a wooden stick and hold the wire and connector together and remove the solder tip. Count to 10 and add heat shrink.
Please do not leave the gold connector bare as they will cause the motor to sputter if they touch while running.
2.4mm Connector -
Same technique as above except half feet the wire into the 2.4mm connector and hold the solder tip on the end of the connector and the wire. Feed in the solder so it flows into the hole and on the wire. Push the wire into the hole. hold the wire a couple inches up the wire with your hands. In about 10 seconds at a solder setting of 500-600 you should feel the heat driving up the wire. Grab a wooden stick and hold the wire and connector together and remove the solder tip. Count to 10 and add heat shrink |
Gold Motor
Connectors
Solder techniques:
3.5mm Connector -
Hold the tip of the solder in the small hole on the side of the connector. Feed in a little solder. If you feed too much don't worry there will be air in the hole. Push the wire into the solder and hold the wire a couple inches up the wire with your hands. In about 10 seconds at a solder setting of 500-600 you should feel the heat driving up the wire. Grab a wooden stick and hold the wire and connector together and remove the solder tip. Count to 10 and add heat shrink.
Please do not leave the gold connector bare as they will cause the motor to sputter if they touch while running.
2.4mm Connector -
Same technique as above except half feet the wire into the 2.4mm connector and hold the solder tip on the end of the connector and the wire. Feed in the solder so it flows into the hole and on the wire. Push the wire into the hole. hold the wire a couple inches up the wire with your hands. In about 10 seconds at a solder setting of 500-600 you should feel the heat driving up the wire. Grab a wooden stick and hold the wire and connector together and remove the solder tip. Count to 10 and add heat shrink. |
2.4mm Gold Connector kit

Click image for larger image |
$3.00 each set
30 amps max
Fits 11 Gauge wire or thinner |
2.4mm Kit
Ideal for all motors -
3 Male+3 Female and 6 colored shrink tubes. |
IN STOCK |
3.5mm Gold Connector kit
Click image for larger image
|
$4.00 each set
70 amps max
Fits 8 Gauge wire or thinner |
3.5mm Kit
Ideal for all motors -
3 Male+3 Female |
IN STOCK
|
| Blenderm - Build Accessory |
Blenderm
Hinge Tape for Foamies. A MUST Have accessory.
|
$2.50 each set |
1.0" x 5 yard roll |
Out of Stock

|
| Motor Mount |
X Axi style mount

Click image for larger image
|
$ 2.75 each |
For mounting a motor on a firewall. Ideal for 400DF pusher. |
IN STOCK |
Direct Drive - Motor Mount |
Motor Mount - Aluminum
|
$ 8.00 each |
300-550 size motor mount. Uses two screws to hold motor. you can drill the other two holes if you like. |
Out of Stock

|
Motor Mount - Plastic
|
$ 2.00 each |
Fits all 400 size motors
16mm x 19mm hole spacing
Fits 10mm x 10mm stick mount |
Out of Stock

|
Custom L & T Brackets
for
Wings and Jets
All brackets now include 8mm long 3mm .5 pitch screws for mounting motors.
These L Brackets are ideal for wings and jets that run on the rear of a plane. They are very strong and act as a heat sink extending the life of your motor.
Install on a firewall in the front of a plane, attached to a motor behind the firewall, to act as a perfect heat sink and to strengthen the firewall.
Q: I mount my motor as a pusher, why are the bevelled screw holes seem to be on the wrong side.
A: Actually only when you mount the motor inside the L do you need the bevelled screw holes. They are there to counter sink flat head screws and not interfere with a prop adaper. In pusher mode (mounting on the outside of the L) pan head screws will not interfere with your prop adapter. We don't bevel both sides since that would weaken the screw holes. |
3" L Brackets -
Fits all 400,450,500, 550 motors, including MEGA and many standard motors EXTREMELY STRONG !
We stopped making the zip tie slots, and added three 1/4-20 tapped screw holes. These are better since they enable adjustment and firm hold. I provide TWO 1/4-20 nylon screws with each mount. You choose which two holes you'd like to use. To save weight - cut off the last hole if you like or just buy the 2" set. |
Newly Modified !
$ 8.50 each set
1/4"-20 plastic screws included
Photo pending update Size remains identical to above photo.
|
Size: 3 "L x 1"W x 1.25"H
1/8" Thick, aluminum
Hole spacing 16mm x 19mm in X Form - STANDARD.
Air holes for motor on two sides and middle. |
IN STOCK |
2" L Brackets w/ 4-40 Screws
Fits all 400,450,500 motors, including MEGA and many standard motors.
500 will not fit INSIDE the L - mount it on outside with pusher or use the 3" L which has more clearance inside the L.
Set consists of one L Bracket and four screws.
L Bracket is tapped with four 4-40 screw holes.
Four stainless steel 4-40 one inch long socket head screws with socket head cap are provided.
EXTREMELY STRONG ! |
$ 8.50 each set
Perfect fit for TwinJet and MicroJet as well as many other planes.
Will Not Bend unless great force is used. |
Size: 2 "L x 1"W x 1.25"H
1/8" Thick, aluminum
Hole spacing 16mm x 19mm in X Form - STANDARD.
Air holes for motor on two sides and middle. |
IN STOCK |
2" T Brackets - Wide
Fits all motors
EXTREMELY STRONG ! |
$ 8.00 each |
Size: 2 "L x 1.5"W x 1.5"H
1/8" Thick, aluminum
Hole spacing 16mm x 19mm in X Form - STANDARD.
Air holes for motor on two sides and middle. |
IN STOCK |
Collet- Prop Adapters
for Direct Drive

Friction fit prop adapters. Ideal for all motors of the listed shaft size. |
M6 Collet for 3mm Shaft
|
$ 2.50 each
Weight: 1.5 grams
Length: 27.5mm
ID: 3mm
OD: 5.9mm (for 5mm prop bore)
Head: 9mm with cut for gripping
Washer: 12mm |
For all the direct drive motors with 3mm axles - this is a very nice Collet. The bore does not go all the way through the aluminum shaft, so it is stronger than if it had. Two lock screws for balanced locking of the axle.
I had older collets that had screws all the way through and stopped selling them since they broke easily - these are stronger, but do not over tighten. |
IN STOCK
|
M5 Collet for 3mm Shaft - Friction
Alternative to above collet. |
$ 2.50 each
Weight: 5.4 grams
ID: 3mm
OD: 5mm |
|
Out of Stock

|
M5 Collet for 3.17mm Shaft - BULLET Adapter
Perfect for 400/500 class motors |
$ 2.50 each
Weight: 4.8 grams
ID: 3.2mm (1/8 inch)
OD: 5mm |
|
IN STOCK
New Style |
|
M6 Collet for 4mm Shaft |
$ 3.00 each |
 |
IN STOCK
New Style |
M8 Collet for 4mm Shaft
Perfect for 500 class motors
I can crank down on these hard without breakage. |
$ 3.50 each
Weight: 8.8 grams
ID: 4mm
OD: 7mm
Steps up from 6mm to 7mm the last 6mm of the collet. |
|
Out of Stock

|
| |
Collet for 5mm Shaft |
$ 4.00 each |
Bullet style |
IN STOCK |
| |
Collet for 6mm Shaft |
$ 4.50 each |
Bullet style |
IN STOCK |
Propellors
10 cent tour of props: First number is diameter, second is pitch. Diameter provides thrust, pitch provides speed. Higher number increases each. Increase both and it will also increase the amp draw from your battery. You can trade between the three Thrust, Speed, Amps. When comparing two motors account for the KV (RPM of the motor at 1 volt). A higher KV motor runs faster - so in planes direct drive the 400DF will run smaller props and higher speed than the 400F. Our 450, 500, 550 motors can provide excellent thrust and speed. |
My favorite Prop setups:
Formosa, Stryker, TwinJet 500T - 7x5 prop
TwinJet - High Speed 500TH 4.2x4 prop - 4S
Slow Stick - 450XT 10x4.7 Prop
SuperFly, SuperFlea - 450T2 - 8x6 Prop
Formosa - 400F direct drive on 6x4 apc prop, 450T - 7x5, 7x6, 450TH Geared
11x7 Prop on 3.89:1 or 3.9:1 gearboxes with 400DF, 450TH.
11x7 on 5.28 H gearbox with Infinity Motor,
11x7 Prop on 3:1 gearboxes with 400F,
10x4.7 on 3:1 gearbox with 300DF,
9x7 on 3:1 gearbox with 400DF, 450TH- excellent mix of speed and thrust,
8x4 direct drive on 400T - 3S, or 9x5 on 2S,
5.25x2.5 APC, or 5.7x3 prop direct drive on 400DF, 450TH- very fast,
4.75 x 4.2 or 4.75x4.75 APC prop direct drive on 400DF, 450TH- very very fast.
10x4.7, 10x6 GWS - B29-10-1000
5x4 prop direct drive on 300DF - makes a small plane come alive, Fast- NOT 3D !
12x8 tends to pull to high an amp on the 3.9:1 400DF or geared 3:1 400F - so stick with 11x7 or 12x6 or increase gearing, 450TH can handle this.
10x6 is very nice for longer flight times - reducing the diameter and pitch bring it into sane speeds and thrust and longer flight times. |
APC Props
appropriate for direct drive

Please do not overprop your motor - check the charts to determine if your motor is rated for the prop 
Sport props fit our prop savers and 5mm Collettes perfectly. The 'e' props need a little work to fit our prop saver but will fit a variety of sized collettes.
If you feel your plane is too fast and does not have enough thrust you need to reduce pitch and/or increase diameter of your prop. |
4.1 x 4.1 e 450TH, 500TH Direct Drive
4.2 x 2 Sport 450TH Direct Drive NEW
4.2 x 4 FreeFlight 450TH Direct Drive NEW
4.5 x 4.1 e 450TH Direct Driv7e
4.7 x 4.2 e 550TH, 450TH Direct Drive, 550TH 4S
4.75 x 4.75 e 300DF, 450TH Direct Drive
4.75 x 5.5 e 300DF Direct Drive
5 x 5 e 300DF, 450TH 3S, 550TH 4S Direct Drive
5.25 x 4.75 e 450TH Direct Drive
5.25 x 6.25 e 450T, 450FT Direct Drive
5.5 x 2.5 Sport 400DF Direct Drive
5.5 x 4.5 e 450TH Direct Drive
5.7 x 3 Sport 400DF Direct Drive
6 x 2 Sport 400DF Direct Drive 3S LiPo
6 x 3 Sport 400DF Direct Drive 3S LiPo
6 x 4 e 400F, 450TH, 550TH 3S Direct Drive 3S LiPo
6 x 4 EMP (Scimitar Style) 400F, 450TH, 550TH 3S Direct Drive 3S LiPo
6 x 5.5 e 450T, 500T Direct Drive 3S LiPo
7 x 3 Sport 400F, 450TH, 400DF Direct Drive 3S LiPo
7 x 4 Slow Fly 450T,500T Direct Drive 3S LiPo
7 x 5 e 450T,500T Direct Drive 3S LiPo
|
APC Prop for direct drive.
$ 2.00 each
Match props to performance using direct drive charts.
Disabled items are out of stock.
|
Excellent for all motors direct drive - extremely fast.
|
IN STOCK |
APC 10-15 Pylon Props
Specialty
More beefy props intended for Gas, but ideal for high speed electric motors.
If you're running a 7x5, try the 6.5x6 for higher speed.
|
6.5 x 5 Pylon
450T, 500T, 550T Direct Drive 3S LiPo
6.5 x 5.5 Pylon
450T, 500T, 550T Direct Drive 3S LiPo
6.5 x 6 Pylon
450T, 500T, 550T Direct Drive 3S LiPo
6.5 x 6.5 Pylon
450T, 500T Direct Drive 3S LiPo |
APC Specialty Props
$ 4.00 each
Thickness at hub: 1/2"
Hole diameter: 1/4"
Disabled means they are out of stock |
These are extremely high speed props and can turn a Low Kv Motor (Slow) into a speed demon.
Make sure your motor can handle the very high pitch props. |
IN STOCK |
APC Sport Props
Specialty
More beefy props intended for Gas, but ideal for high speed electric motors. Less likely to break than a 'e' prop but heavier is slightly less efficient. Ideal for extreme RPM setups or where an 8 or 9 inch prop does not provide enough speed.
Trade 1 inch of diameter for 2 inches of pitch:
ex: Swap 8x4 for 7x6. |
7 x 6 Sport 450T Direct Drive 3S LiPo
7 x 7 Sport 450T, 450XT Direct Drive 3S LiPo
7 x 8 Sport 450XT Direct Drive 3S LiPo
7 x 9 Sport 450XT, 500XT Direct Drive 3S LiPo
7 x 10 Sport 450XT, 500XT Direct Drive 3S LiPo |
APC Specialty Props
$ 2.50 each
Disabled means they are out of stock |
These are extremely high speed props and can turn a Low Kv Motor (Slow) into a speed demon.
Make sure your motor can handle the very high pitch props. |
IN STOCK |
APC Props
I like these props -
excellent on lower Kv Motors for higher speed |
7 x 6 e $ 2.50 450T, 450T2,
500T
8 x 4 e $ 2.50 450T2
8 x 6 e $ 2.50 450T2
8 x 8 e $ 2.50
9 x 6 e $ 2.60
9 x 7.5 e $ 2.60
9 x 9 e $ 2.60
10 x 10 e $ 2.90
11 x 5.5e $ 3.20 500xt, 450xt
11 x 7 e $ 3.20 550XT
12 x 6 e $ 3.95 550XT |
APC Prop for Geared and high speed
|
Match props to performance using direct drive charts or geared |
IN STOCK |
APC Slow Fly Props |
8 x 3.8 SF $ 2.50
2204
8 x 6 SF $ 2.50 450T2
9 x 3.8 SF $ 2.60
10 x 3.8 SF $ 3.00 450xt
10 x 4.7 SF $ 3.00 450XT, 500XT
12 x 4.7 SF $ 4.00 550XT |
Slow fly props - wider than 'e' props. |
|
IN STOCK |
GWS
Propellors |
12x8 HD $2.00 each Orange 550XT
11x7 HD $1.60 each Orange 550XT
10x6 HD $1.50 each Black
10x4.7 SF $1.00 each Orange
8x4 HD $1.00 each Black 2204
Click image for larger image |
HD Props are a great value for the price. |
 |
IN STOCK |
Replacement Bells
Most common Questions:
Q: I have a 2.3mm bell - can I switch my tractor to a pusher.
A: Yes - the 2.3mm bells all have 3mm axles turned down to 2.3mm for pinion mounting
on the 500 size motors the 3.17 tractor and 4mm pusher bells are interchangeable.
Q: I have a 400DH and want to mount a propellor for use in an airplane
A: This would be very very fast and require to small a prop, or an EDF to be effective. Change to a Mid Speed bell and convert your 400DH to a 400DF.
Q: Can I convert a 400DF, 450T, 450FT, 450XT, 500T to a lower speed motor ?
A: NO - they already run the torque bell, you can convert them to the higher speed motors 400DH, 450TH, 450F, 450XTF 500TH |
500 Bell
|
500T Pusher BELL
4mm axle
This bell will convert a 500TH into a 500T or replace a 500T bell. And 500SH into higher torque motor. |
$ 15.00 each
See the new 4mm Prop Adapters below |
Convert your 3381 Kv 500TH into a 1900 Kv pylon racing monster, or 500SH into 1800 Kv- MORE THRUST - larger prop |
Out of Stock

|
500T Tractor BELL
3.17mm axle |
$ 15.00 each |
Out of Stock

|
500TH Pusher BELL
4mm axle
This bell will replace a 500TH or convert a 500T into a 500TH. Also used to convert a 500XT into 500XTF. |
$ 15.00 each
See the new 4mm Prop Adapters below |
Replacement bell for your 500TH motors.
500T + this bell = 500TH
500XT + this bell = 500XTF
I do NOT recommend the C Clip for Helicopter use. |
IN STOCK |
500TH Tractor BELL
3.17mm axle |
$ 15.00 each |
IN STOCK |
| 500 Size |
Pusher C Clip 500/550 size |
$1.00 each |
Not needed in heli setup. This is needed in PUSHER setup. |
IN STOCK |
| 400 and 450 Size |
Pusher C Clip 400 size
Pusher Bell - C Clip. Enables you to keep from losing pusher bells or to use in tractor mode. Perfect size for 3mm axle. |
$1.00 each |
|
IN STOCK |
450 Tractor Bell
HIGH SPEED |
3mm for direct drive |
$15.00 each
Bell / Axle / Magnets installed |
High quality bell with magnets and axle installed.
Convert a 450T to a 450TH
Convert a 450F to a 450FT
Convert a 450XT to a 450XTF
450TH Bell- 3000 KV Bell
450F Bell - 3450 Kv Bell
450XTF - 1500 Kv 450XT conv |
IN STOCK |
450 Tractor Bell
HIGH SPEED |
2.3mm for direct drive |
$15.00 each
Bell / Axle / Magnets installed |
High quality bell with magnets and axle installed.
Convert a 450T to a 450TH
Convert a 450FT to a 450F
Convert a 450XT to a 450XTF
450TH - 3000 KV Bell
450F - 3450 KV Bell
450XTF - 1500 Kv 450XT conv |
IN STOCK |
450 Pusher Bell
HIGH SPEED |
3mm for direct drive |
$15.00 each
Bell / Axle / Magnets installed |
High quality bell with magnets and axle installed.
Convert a 450T to a 450TH
Convert a 450FT to a 450F
Convert a 450XT to a 450XTF new
450TH - 3000 KV Bell
450F - 3450 KV Bell
450XTF - 1500 Kv 450XT conv |
IN STOCK |
500TH + Torque Bell = 500T Motor
500T +HIGHSpeed Bell = 500TH Motor
500XTF +Torque Bell = 500XT Motor
500XT +HIGH Speed Bell = 500XTF Motor
450TH Motor +Torque Bell = 450T Motor
450T Motor +HIGH Speed Bell = 450TH Motor
450F Motor +Torque Bell = 450FT Motor
450FT Motor + HIGH Speed Bell = 450F Motor
450XT + HIGH Speed Bell = 450XTF Motor - 1500 Kv, 8x6 max prop
Informational
450TH 3.17mm bells are LOCKED on and can not be removed.
Heli Dudes: If you think you'll need to remove this bell you should buy a 3mm tractor for your heli and a 3mm pinion. |
450 Tractor Bell
Torque |
3mm for direct drive |
$15.00 each
Bell / Axle / Magnets installed |
High quality bell with magnets and axle installed.
Convert a 450TH to a 450T
Convert a 450F to a 450FT
Convert a 450XTF to a 450XT
450T - 1700 KV Bell
450FT - 2250 KV Bell |
Out of Stock
 |
450 Pusher Bell
Torque |
3mm for direct drive |
$15.00 each
Bell / Axle / Magnets installed |
High quality bell with magnets and axle installed.
Convert a 450TH to a 450T
Convert a 450F to a 450FT
Convert a 450XTF to a 450XT
450T - 1700 KV Bell
450FT - 2250 KV Bell |
IN STOCK
|
450 Tractor Bell
Torque |
2.3mm for direct drive |
$15.00 each
Bell / Axle / Magnets installed |
High quality bell with magnets and axle installed.
Convert a 450TH to a 450T
Convert a 450F to a 450FT
Convert a 450xTF to a 450XT
450T - 1700 KV Bell
450FT - 2250 KV Bell |
IN STOCK |
400 Replacement Bells |
400F
Tractor Bell
Intended for Direct Drive
|
2.3mm for gearing
400F only
3mm direct drive
Click image for larger image
400F replacement bell (Tractor/Puller)
12 Magnets and axle installed.
|
$12.00 each
Bell / Axle / 12 Magnets installed |
High quality bell with magnets and axle installed.
Fits 20 - 20.25mm stators.
Prop saver recommended. |
IN STOCK |
400DF
Tractor Bell
Intended for Gear Box |
2.3mm for gearing |
$12.00 each
Bell / Axle / 12 Magnets installed |
High quality bell with magnets and axle installed.
Fits 20 - 20.25mm stators.
Prop saver recommended. |
IN STOCK |
400DF
Pusher Bell
Intended for Direct Drive |
3mm
Click image for larger image
400F, DF or T 3mm replacement bell (Pusher)
12 Magnets installed
Will not fit Gearbox pinions intended for direct drive ! |
$12.00 each
Bell / Axle / Magnets installed |
High quality bell with magnets installed.
Fits 20 - 20.25mm stators.
Prop saver recommended. |
IN STOCK |
400DH
Tractor Bell |
2.3mm for Heli's |
$15.00 each
Bell / Axle / 6 Magnets installed |
High quality bell with magnets and axle installed.
Fits 20 - 20.25mm stators.
Prop saver recommended. |
IN STOCK |
300 Replacement Bells |
| 300DF Bell |
Tractor Bells

Click image for larger image |
2.3mm axle In Stock
3mm axle
300DF 3mm replacement bell (Tractor/Puller)
12 Magnets and axle installed. |
$10.00 each
Bell / Axle / Magnets installed |
High quality bell with magnets and axle installed.
Fits 20 - 20.25mm stators. |
IN STOCK |
Pusher Bells

|
3mm axle |
IN STOCK |
Lithium Polymer Batteries
Lithium Polymer batteries are extremely powerful. Please be very careful when charging batteries. You should charge in a location that will not damage your property if the batteries catch on fire. An overcharged or damaged battery pack can catch on fire. I recommend charging on a ceramics tiles or cement and storage in a fire safe location. Never charge batteries unattended. Please be safe !

Click for larger image - right image is Balancing TAPS info
No Warranty on Batteries
How to Combine LiPo's |
| 2S LiPos |
1500 mah 2S
LiPo's
10C
|
Tronics
1500 7.4 volt
2S Li-Polymer Battery (10C) |
parkflyer 2S
$28.95 each$15.95
Tronics 1500 LiPo's
15 Continuous
Flat packs ! |
- 1500mah Capacity
- 7.4 Volts
- 12mm X 42mm X 68mm
- Rated at 12 Amp Constant Discharge
- Rated at 15-16 Amp Burst for 10 seconds
- 80 grams / 2.8 oz
- Balancing Taps
|
IN STOCK |
| 3S LiPos |
| See photo above |
1300 11.1 volt
3S Li-Polymer Battery (25C)
from SAIBN |
$29.95
32.5 Continuous
36 Amps Max |
- 1300mah Capacity
- 11.1 Volts
- Balancing Tapsinstalled
- Ultra Connectors installed
- Weight:
116 grams 4 1/8 oz's
- Actual Size (LxWxH): 66x34x23 mm
2 5/8 " x 1 1/4" x 7/8"
|
Out of Stock

|
2100 mah 3S
LiPo - 20C
|
2100 11.1 volt
3S Li-Polymer Battery (20C)
from SAIBN |
lower price
$34.95
42 Continuous
50 Amps Max
|
- 2100mah Capacity
- 11.1 Volts
- Balancing Tapsinstalled
- Ultra Connectors installed
- Weight 6.7 oz
- Actual Size (LxWxH): 101x34x23 mm
4" x 1 1/4" x 7/8"
|
IN STOCK |
| See photo above |
2200 11.1 volt
3S Li-Polymer Battery (30C)
from SAIBN |
new higher capacity
$41.95
66 Continuous
70 Amps Max |
- 2200mah Capacity
- 11.1 Volts
- Balancing Tapsinstalled
- Ultra Connectors installed
- 4"x1 3/8" x 1"
- Weight:
180 Grams 6 3/8 oz's
- Actual Size (LxWxH): 101x34x23 mm
4" x 1 1/4" x 7/8"
|
IN STOCK |
| See photo above |
4800 11.1 volt
3S Li-Polymer Battery (25C)
from SAIBN |
new BIG pack
$95.95
120 Continuous
130 Amps Max |
- 4800mah Capacity
- 11.1 Volts
- Balancing Tapsinstalled
- Ultra Connectors installed
- Weight:
448 Grams w/ taps
15 7/8 oz's w/ taps
- Actual Size (LxWxH): 140x42x30 mm
5.5" x 1 3/4" x 1 3/16"
|
IN STOCK |
| 4S LiPos |
| See photo above |
2200 14.8 volt
4S Li-Polymer Battery (30C)
from SAIBN |
new higher capacity
$59.95
66 Continuous
70 Amps Max |
- 2200mah Capacity
- 14.8 Volts
- Balancing Tapsinstalled
- Ultra Connectors installed
- Weight:
232 Grams w/ taps
8 1/4 oz's w/ taps
- Actual Size (LxWxH): 101x34x30 mm
4" x 1 1/4" x 1 3/16"
|
IN STOCK |
| 5S LiPos |
| See photo above |
4800 18.5 volt
5S Li-Polymer Battery (25C)
from SAIBN |
great for large plane/heli
$149.95
120 Continuous
130 Amps Max |
- 4800mah Capacity
- 18.5 Volts
- Balancing Tapsinstalled
- Ultra Connectors installed
- Weight:
734 Grams w/ taps
25 7/8 oz's w/ taps
- Actual Size (LxWxH): 140x42x53 mm
5.5" x 1 3/4" x 2 1/16"
|
IN STOCK |
| Battery Chargers |
Battery Charger
|
GTA6
1S-6S Charger
The GT A6 is a very advanced charger, able to charge, balance and discharge Lion, LiPo, LiFe (A123), NiCd and NiMH batteries.
Large amount of power cords for all popular batteries.
My Favorite charger ! Many inexpensive chargers were tested and they just are not worth the hassle and aggravation. I've yet to have a problem with this charger. Thermal cut off sensor makes it safer, but please charge in safe charge station.
Power supply is perfect for this charger.
|
$69.95
Features;
Microprocessor controlled
Delta-peak sensitivity
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.
|
Spec.
Input Voltage: 11~18v
Discharge: 5W
Charge Current Range: .1~5.0A
Discharge current range: .1~1.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 580g
Dimensions: 133x87x33mm
This charger has a JST-XH charge plug, which makes it compatible with Fullymax, Zippy, HXT, Long Max and any pack with a JST balance adapter. |
IN STOCK |
| Power Supply |
12 Volt 5 Amp Power Supply for Charger
|
$12.95 each |
This plugs into the above A6 Charger for use when not connected to a car for power. |
IN STOCK |
| Battery Connectors |
Ultra Connectors
for Battery |
Ultra Connector
Perfect for Battery Power and ESC Connector
RED - from China
|
$2.00 each set
Male+Female + shrink tube |
Polarized, low resistance connectors that fit the Deans Ultra plugs.
Includes one Male, one Female connector |
IN STOCK |
JST Battery Connectors
|
JST Connector Set
Low Amp/Light weight Battery and ESC Connector
|
$2.00 each set
Male+Female
4 inch wire length |
Polarized, low resistance connectors.
Includes one Male, one Female connector |
IN STOCK |
2S Balancing Connectors
|
2S Balancing connector kit
|
$1.00 each
Fits all our 2S batteries |
Includes Male + Female connector + solder pins as shown
Make your own extension cables
|
IN STOCK |
Shipping / Tax / Comments / Payment Method |
Shipping
Please make a selection ! |
Continental US - One Motor - $7 ConUS, two or more motors Free Shipping.
Choose SHIPPING method:
International Shipping : Please choose a
type of international shipping
USPS no longer supports small Global Priority shipping!
|
| NYS TAX |
If we ship to New York State we have to charge TAX. So please add the 8.25% state tax if in New York, or your order may be delayed while we try to contact you.
8% NYS Tax Included |
Odds and Ends:
(Optional) |
Inform me of updated info:
Link or location that referred you to JustGoFly ?
|
Your Order
To complete this order press the
'PRESS TO SUBMIT ORDER' Button |
Done ?
Very important for you to fill the next two fields so I know who to contact
Your Full Name:
Your PayPal EMAIL Address (REQUIRED):
This is the only thing that links your payment to your order -
so please correctly enter your PAYPAL Email address.
Comments - special shipping instructions or note:
Now Press the Submit Order button - you will then be prompted for payment of your order.
For now - please remember the "Final Price" - we will automate this later
Final Price :
|
This big button only posts this form to JustGoFly for processing.
We're vacationing until July 6th.
All orders placed upto July 5th will ship on the 6th.
Your order is not final until payment is made which will follow once this button is pressed.
A correct email address above will post this form to us and generate an email to you with your order information. |
Use the above "Press to Submit Order" button.